e cigarette vv vamo mod kit variable voltage 3v-6v

Vamo e cig Components:

1pc- Pipe body
1pc- Trust Fire charger
1pc- Big box
1pc- English manual
1pc- CE4 atomizer
2pcs- 18350 battery or 18650 battery

Variable Voltage vamo e cig Specifications:

1. Size: 135(L)22(D)mm
2. Threading: 510/eGo
3. Variable Voltage: e cigarette itaste SVD can be adjusted from 3.3 - 6.0 volts in 0.1 volt increments.
4. Variable Wattage: Wattage can be adjusted from 3.0 - 15.0 W in .5 watts increments.
5. Short Circuit Protection.
6. Reverse Battery Protection Circuit
7. Battery Voltage Detection
8. Resistive Load Detection ( Ohms meter )
9. ON/OFF battery switch
10. LED Battery Power Display
11. Low Voltage Warning
12. Overtime Vaping Warning
13. Vamo supports 18350, 18500 or 18650 batteries
14. Battery safety protection
15. Myriad compatible ( Thread fit CE4, CE5, eVod, Protank, T2, T3, VIVI NOVA and 510 etc )
16. Change battery and switch VV or VW have parameter memory function
17. Built-in 3 digit display ( Ohms meter , Volts /Watts , Atomizer voltage output )

Features of vamo e cig :

- When smoking longer then 10s, it will be close by itself.
- When the voltage below 3.2v(1pc battery)/6.4v(2 pc battery), or short cut ,the LCD display will show "LO-V" to you.
- It can adjust by itself no matter which kind of atomizer you use.
- It can protect itself when the battery is putting wrong.
- Keeping press on the right button 3 seconds,the display will show you the resistance,and 3 seconds on the left button, it will show you the voltage,and 3 seconds on both of them,it will show you the power.
- When the resistance below 1.2 ohm,LCD display will show "LO-Ω" to you.
- Can use 18650 battery 1 pc,18350 battery 2pca or 18350 battery 1 pc.
- Compatible with ce4, ce, ce6, DCT, vivi nova, protank, evod etc.